Safe Area Gas Detectors

Tocsin-10

International Gas Detectors are well known throughout the Oil, Gas and Process industries for their hazardous gas detection safety systems. When our customer base contacted us for a similar quality flammable gas detector for domestic applications, IGD’s technical team rose to the challenge. Flammable gas detectors for the domestic market are typically low cost and built to a tight budget.

Tocsin-20

TOC-20 Refrigerant Gas Detector provide accurate measurements of refrigerants aiding plant compliance to F-Regs and EN 378. Clean lines and easy integration into existing or newly planned control systems make the TOC-20 the plant engineers device of choice. Using the latest microprocessor technology and software TOC-20 is a reliable long term monitoring solution. TOC-20 is supplied pre-calibrated ready to use. Please

Tocsin-103

Tocsin 103 Industrial Gas Detector are designed for cost effective safe area gas detection solutions. They incorporate micro processor technology to give a stable 4-20mA process signal output. The addressable option allows extensive reductions in cost of installation through material and labour savings. The in built processor can be used to pre-calibrate the sensors prior to installation. Alternatively calibration can be achieved on site via the Oliver IGD control panel or locally using a handheld PC device or laptop.

Tocsin-30

TOC-30 Series Safe Area Gas Detector’s from IGD are available as both legacy Analogue 4-20mA gas detectors or modern addressable versions. This series of Safe Area Gas Detector’s are manufactured in rugged ABS housings which provide a number of advantages. Sealing is moulded in as part of the housing with detector and electronics in separated compartments. The detector is protected by a unique labyrinth arrangement which provides both dust and splash protection.

Tocsin-750

IGD’s 750 series ATEX gas detectors are the next step in fixed gas detection technology.

IGD’s Sentinel+™ 2-Wire protocol uses a 2 core cable for both power and data communications. Not only fewer terminations, Sentinel+™ 2-Wire protocol has no polarity requirement for its connections. Cable terminations are reduced, No polarity requirements means fewer errors and faster installs.